LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS, Grade E Shipbuilding steel plate

HOME >

Capable Classification Society Quality Authentication from LR, ABS, NK, GL, DNV, BV, KR, RINA, CCS,ASTM A131 Grade E shipbuilding steel is not only the common tensile strength steel but also is the Hull structural steel. Grade E shipbuilding steel has good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and good welding properties. Shipbuilding steel grade E is used for shipbuilding and oil platform purpose and they are approved by ABS,DNV,GL,BV,LR,NK,RINA and other classification societies. What's more,the A shipbuilding steel E can be used in the manufacture of the ship's hull structure whose weight is below 10000 tons,and usually do navigation around coastal and river area.

Grade E shipbuilding steel plate specification:
Thickness: 6mm-200mm, Width: 1500mm-4000mm, Length: 6000mm-180000mm

Grade E shipbuilding steel Chemical Composition


Grade

C max

Si max

Mn

P max

S max

Als min

Grade E

0.18

0.35

 0.70-1.20

0.035

0.035

0.015

Note: CE: C+1/6Mn ≤ 0.40% Cu ≤ 0.35%,Ni ≤ 0.30%≤

Grade E shipbuilding steel Mechanical Property


Grade

Rm
(MPa)

Re(MPa) min

A% min

Akv/J min

Grade E

400-520

235

22

E.T °C

Thickness (mm)

-40

 50

>50-70

>70-100

L

C

L

C

L

C

27

20

34

24

41

27

 Note: In the list , Rm: tensile strength,Re: Yield strength,A%: elongation, E.T: experimental temperature,L: lengthways, C: crosswise.  

Grade E shipbuilding steel Condition Of Delivery


Grade

category

The thickness of steel

≤ 12

>12.5-25

>25-35

>35-50

>50-100

Grade E

Plate/sheet

N,TM

Profile steel

N(25),TM(25),AR*(15),CR*(15)

-

Note: 1. delivery condition: A =Any ; N=Normalized ; CR=Control Rolled ; TM=TMPC, Temperature - deformation control rolling; AR*= Can be hot rolled with the agreement of Classification Society ; CR*=Can be control rolled with the agreement of Classification Society .
2.  The Figure in the ( ) means the sampling volume to do the impact test, the unit is Ton.(-) means without impact test.

E steel Contrast in the different standard


ASTM A131M

TOCT 5521

JIS G3106

BS LR

GB712

Grade E

Grade E

SM400B
SM400C

Grade E

Grade E

Grade E shipbuilding steel Available Specification


variety 
Thickness (mm) Width (mm) Longth/ inner diameter (mm)
Shipbuilidng plate cutting edges 6~200 1500~3000 3000~15000
non- cutting edges 1300~3000
Shipbuilidng coil cutting edges 1.2~19 1500~2000 760+20~760-70
non-cutting edges 1510~2010

Grade E shipbuilding steel theoretical weight


Thickness (mm) 
theoretical weight Thickness (mm) theoretical weight
Kg/ft2 Kg/m2 Kg/ ft2 Kg/m2
6 4.376 47.10 25 18.962 196.25
7 5.105 54.95 26 20.420 204.10
8 5.834 62.80 28 21.879 219.80
10 7.293 78.50 30 23.337 235.50
11 8.751 86.35 32 25.525 251.20
12 10.21 94.20 34 26.254 266.90
14 10.939 109.90 35 27.713 274.75
16 11.669 125.60 40 29.172 314.00
18 13.127 141.30 45 32.818 353.25
20 14.586 157.00 48 35.006 376.80
22 16.044 172.70 50 36.464 392.50
24 18.232 188.40      

Grade E shipbuilding steel dimensional deviation


nominal thickness(mm)
The thickness deviation with following width (mm)
≤1200 >1200~1500 >1500~1800 >1800
>6.0~8.0 ±0.29 ±0.30 ±0.31 ±0.35
>8.0~10.0 ±0.32 ±0.33 ±0.34 ±0.35
>10.0~12.0 ±0.35 ±0.36 ±0.37 ±0.43

nominal thickness(mm)

 

minus deviation (mm) The thickness deviation with following width (mm)
> 1000 ~1200 > 1200 ~1500 > 1500 ~1700 > 1700 ~1800 > 1800 ~2000 > 2000 ~2300 > 2300 ~2500 > 2500 ~2600 2600 ~2800 > 2800 ~3000
>12~25 -0.8 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.8 +1.0 +1.1 +1.2
>25~30 -0.9 +0.2 +0.2 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.1 +1.2
>30~34 -1.0 +0.2 +0.3 +0.3 +0.4 +0.6 +0.8 +0.9 +1.0 +1.2 +1.3
>34~40 -1.1 +0.3 +0.4 +0.5 +0.6 +0.7 +0.9 +1.0 +1.1 +1.3 +1.4
>40~45 -1.2 +0.4 +0.5 +0.6 +0.7 +0.8 +1.0 +1.1 +1.2 +1.4 +1.5

as a Grade E shipbuilding steel supplier in China , more infotmation about Grade E shipbuilding steel, please contact us.


Kindly send email to sales4@bebonchina.com, The professional team will support your work as one-to-one.
At last, Welcome to Visit our mill for long coopeation and checking steel quality in any time.

Henan BEBON international co.,ltd located in zhengzhou ,henan province of china. Since it was established in 2008, Henan BEBON has earned an outstanding reputation for its profession in exporting shipbuilding steel. About the products, we are mainly specialized in steel products for shipbuilding which have been products for shipbuilding which have been approved by some authoritative classification societies,likeLR,BV,ABS,DNV,GL and so on.


Get In Touch24/7 Support

We receive enquiries in English, Español (Spanish). Our professional team will reply to you within one business day. Please feel free to contact us!

Leave a Message Email: sales4@bebonchina.com